The v1 splinter with short stems has warm vapor. Through a glass rig or with long stem is very cool and tasty. I'm using from 23 -26 watts.

I know, I just need more space, and now for some reason I am looking at the Sai atomizer to go with the mod box for concentrates.

hi really like what you did , where did you get the elbow joint for the Z please ?

Sorry , mean this

that is the whip from my Arizer EQ. It convieniently fits. Im sure you could order any 18 mm whip joint and tubing to make it work.

Hi ok great will seek one out , got a Z coming can’t wait ... cheers :smile:

I have this one and it works great!

Laboy HMA013102 Glass Inlet Adapter with 90 DGR Bent Hose Connecting and 19/22 Male Joint Vacuum Adapter https://www.amazon.com/dp/B018924D2G/ref=cm_sw_r_cp_api_i_biBsCbQ3M6NC3

Cool thanks for the link :up:

I can't get good vapor unless I'm at 50 watts. I'm sure it is my mod. 26 wouldn't do shit on it. Wisemec Rx3000.

that's true with my splinter z . The new v1 has a different heater and takes far less power.

V1 Shipped on Saturday with no tracking. Still hasn’t arrived and my USPS app shows no future packages to be delivered to my address. About Two months ago I ordered a Z direct from RBT on a Saturday morning it shipped same day and arrived on Monday, guess I got lucky with that one.

my shipments from the weekend have all been delayed with all the storms across the country. I hope yours arrives soon.

To ease everyone's mind (or perhaps make you worry more) the units were shipped without tracking. Not sure how or why but I was told they are all out and should be to you by Monday latest. Hit me up at vgoodiezatgmaildotcom on Tuesday if you don't get it.

If anyone needs TCR settings mine is working so damn well. Fast heatup, perfect huge clouds and abv slowly turning yellow then brown. Wattage on cruise doesn't even come close to the precise extraction and ability to constantly back to back rip huge clouds.

Ill post a video showing how to click through and set it up later

Yeah dude! I have been wanting to do this but I can't for the life of me learn about mods. Like I can't understand this junk lol. Maybe every time I want to get it done I am high. :grimace:

Im sending it to sneaky pete and posting here later today how to click through and set up the settings. Its easy. Ill give some directions to dial it in too because each splinter is a tiny bit different. This will be for the regular splinter. Z will have different values so that will take some tinkering which I haven't done since I do not own because my regular one cant get that much better.. I get giant clouds with perfect extraction. if my settings are too hot or too cold change up and down by TCR values of 5's to try and match the 370 degree temp setting. Mine feels like 370 from the mighty or something

Received my V1 pre order just now. Two things.

1) These are NOT 19/19 only as reported(at
least not mine). They will take both the 19/19 size stems that come with it OR 19/22 stems as my 19/22 stems fit just fine.

2) My V1 is finished much nicer then the Splinter Z I had that was made here in the US.

19/22 bent stem shown.

Edit: did a quick burn off at 35w blowing through one of the small holes and blocking off the other. Nasty stink came out the first few times but seems fine now. Going to let it cool and do it a few more times.

Alright I have a video but it’s a little to long to post. Suggestions?

shorten the video :smile: should be easy if shot on phone

when I movie shortens videos it crops out and deletes the other stuff

can you manually edit it?

I figured out a way to email it! Everyone who wants the video write your email below! Sneaky said it was helpful for him. Unless someone knows a way of posting a 2 minute video here

upload to YouTube and post link here.

ok I will have to do it that way then

Couple of my ecig buddies have old box mod smok and a kangertech any suggestions on which to get or get a new mod ? I would like to get into a splinter cheap as possible. Buddy may have one more mod but doesn’t know yet? Will these work or do I need specific type of mod power/program?

What is the max wattage on them? Need at least 50w.

I have a SMOK T-Priv it will work but there is a 12 second timer on the fire button so you have to pulse the trigger. I am glad to have gotten a new mod it definitly makes a difference. IMO

Get a wismec that can run cruise mode and TCR settings.

Thanks I will find out more info when my boy gets home from work but thanks will ask max wattage and post back.

any headway on the tcr help?