The G43 vaporizer needs to be connected to a mod controller for power, and the mod needs a custom firmware installed on it that adds an "auto-fire" feature.

★ COMPATIBLE MODS ★

These mods have been tested by me personally with the G43 and work great:

• Wismec Sinuous P80 (single 18650)
• Wismec Reuleaux RX3 GEN3 Dual (dual 18650)

Here's a list of other mods that have been tested by real end users and have been reported to work properly (help me expand this list!):

• Joyetech eVic Primo Mini
• Joyetech eVic VTC Dual
• Wismec Reuleaux RX2 21700

★ RECOMMENDED BATTERIES ★

The 18650 batteries listed below have a 3000mAh capacity and work great with the G43 setup:

• Samsung 30Q
• LG HG2
• Sony VTC6

IMRBatteries is a good store that I've purchased batteries and chargers from multiple times. If you need an external 18650 charger I recommend the Q2 and Q4 models from the brand Nitecore.

★ COMPATIBLE FIRMWARE ★

The custom firmware we are using is called myevic and you can download it by clicking here.

Wismec and Joyetech are the main brands of mods that are compatible, and here are the links to download their software used to install the firmware:

http://www.wismec.com/software/
http://www.joyetech.com/mvr-software/

I've also done a lot of testing with the Tubo Evic firmware, which is another one that adds a "cruise" mode, but I did this testing on a different mod because it's not compatible with the P80.

★ HOW TO INSTALL FIRMWARE ★

1) Plug micro-USB cable into the mod and a USB port on the back of your PC.

2) Open the Wismec or Joyetech updater software that you downloaded.

3) Click on "Update" and select the myevic.bin file that you downloaded.

4) Wait for software to confirm that the update is complete, then you can disconnect the mod from your computer and you're good to go.

★ HOW TO ENABLE AUTO-FIRE ★

1) Open main menu by pushing the power button and + button at same time

2) Go to Vaping menu

3) Scroll down to "AutoFi" and toggle it ON

4) Set "ATime" to infinity

To engage cruise mode simply press the power button for a quick moment and then release, the power should now stay on until you hit the main button again :ok:

★ OTHER SETTINGS ★

To enable 0.1 watt adjustments:

1) Open main menu by pushing the power button and + button at same time

2) Go to Interface menu

3) Toggle OFF the "1Watt" setting

To enable stealth mode if you get the "device hot" error:

Hold down the power button and the - button at the same time for one second. This will turn off the screen but still allow full functionality of the mod.

To raise temp sensor if you get the "device hot" error:

Open menu, click on Expert, click on MAX, raise value to 99ºc (210ºf).

If you still get any errors on your mod try reinstalling the latest firmware again, this has worked for a few people to fix the issue.

★ HOW TO START VAPING ★

1) Start with the mod set at 11 watts and engage auto-fire.

2) Wait 3 minutes for it to heat-up, in the meantime carefully load the herb chamber 80% full.

3) Insert the loaded slide into your glass rig.

4) Inhale at a brisk pace for as long as you comfortably can, pulling out the slide at the end of your draw to clear the vapor in your rig.

5) Every 2 draws take off the basket screen and stir your herb with included pick tool.

6) Repeat taking draws and stirring until your herb is spent, you'll know when.

------------------

This post will be updated regularly with new information