• VapeCritic
    12.5k
    Wanted to start a thread about this so maybe some accessory manufacturers will catch wind of it...

    Aside from a few basic things I don’t necessarily plan on taking time to design & produce cool or elaborate accessories for the G43, not only for lack of time but also lack of skills required.

    What would you guys like to see made for it?

    Some cool stands? Storage or travel cases? Anything else?

    Maybe we can help another small biz out by having them make and sell some spicy G stuff :fire:
  • Dr green thumb
    5k


    I'd like to see a nice storage container so that it doesn't get broken between sessions.
  • Baron23
    8.2k
    Some cool stands?VapeCritic

    To me, number one is some sort of stand with a slot so you can sit the G43 with the oven up for loading....and if done right, can also be used to just put the G43 down between hits.
  • UbarDog
    1.2k
    I want a stand for it.

    One you can place g-43 inside upside down. It should have a slot for cable on under it and hold it firm.
    Above it should be smooth and funnel like with a flat spot to place a load before you poke it down inside G-43.
    Next to this would be a place for it to stay in upright position too
    cebxm7xv4qsw03s5.bmp
  • Hazel
    3.7k
    Oh I got those stands for you guys... just waiting on those mofo's to finally ship!!! Ughhhhhh Patience is no where near my strong suit.

    What is this? Did you make that diagram prototype mock? What program did you use? CAD software? lol
  • Gryfin
    131
    Number one for me is way to transport it. Gotta show friends!
  • Baron23
    8.2k
    Yeah, Hazel...but I'm talking something very like @ubardog 's dwrg. Not just a joint stand, but needs to be able to hold it with the oven facing UP!!

    Exactly. Not sure about the top "loading" surface....I would want it easy to insert/remove a hot G43 from this stand and to slip it in they way you show might be a bit fiddly???
  • UbarDog
    1.2k


    Oh such adv software ! its called "Paint" ajjajajjaja Took all of 60's please don't mock me :yum:

    Its just another lump of wood to add to the list. Need!!! to get to lumber yard soon !!
    20190211-182350.jpg
    Need to upgrade J-hook stand too

    ↪UbarDog
    Exactly. Not sure about the top "loading" surface....I would want it easy to insert/remove a hot G43 from this stand and to slip it in they way you show might be a bit fiddly???
    Baron23

    Thats proberly right. Maybe just a stand and funnel .

    Or have the top removeable with strong magnets.
  • Hazel
    3.7k
    lmao I legit have had to use paint and word to edit pictures on the regular. :monkey:

    I don't know shit about shit when it comes to CAD programs, however it does look like a nice drawing that could have been done in some spesh software. :strong:

    I know how to use Photoshop and a few other editing tools now a little bit on the pc but I don't need them or have them installed on this one so there goes that LOL Instead I use my phone and pic editing apps on there which have been proven to be gold. :fire:

    I do like your skills man. And I have no idea wtf you guys @UbarDog @Baron23 are talking about loading it upside-down but i'm happy to step away from the convo so Bud keeps on loading it for me and I don't have to learn this potential loading technique. I'm a simple gal when it comes to my bud... I like it ground, rolled, and not tasting like burnt popcorn ass. :ok: :sweat: :kiss:
  • BestBuds
    1.1k
    I have so many ideas for accessories for this little guy. Most of which is wood. I have an idea for a heat shield and a heat shield with an extended handle, a stand (that doubles as a case), a wood unit that would hold the mod and the G so you could use a glass mouthpiece and it's kinda like an all in one semi portable unit. I just have so little time to draw it all out and work, and deal with debilitating pain, and start a business. :sweat:
  • Ctipp22
    1.9k
    A female piece that connects the heater cord into the wall power. Unlimited battery..
  • UbarDog
    1.2k
    @Baron23 MMM maybe just a 20mm pipe spring clip (Terry Clips) attached to something. The rim of the ground glass should stop it falling

    500206__62784.1447859872.1280.1280.JPG?c=2
  • Baron23
    8.2k
    Yeah, something....so how are you going to push against the hot section to get it into the spring clip?

    If it just slides in from the top, and no need to press clip open, then yeah...you might be onto something.
  • MothChewMoth
    1.2k
    Some cool stands?
    — VapeCritic

    To me, number one is some sort of stand with a slot so you can sit the G43 with the oven up for loading....and if done right, can also be used to just put the G43 down between hits.
    Baron23

    I agree with this assessment. Some sort of cover for the beaded section would be great too.
  • Karec
    473
    The stand off course but i think @Hazel is on top of that just waiting to arrive, i would love to see a modification that allowed to use a EVO ELB in the G43, i think this way would be better to load up and clean and prevent the G to become dirty, i think @zancru did it after a deep clean of the G, and maybe its not that hard to do it, off course ELBs would be an accessory to add up.
    Making up a smaller ELB for micro dosing i think is a also good idea

    195 tic tac tic tac :groan: :up:

    Cheers
    :cool:
  • zancru
    2k

    Actual ELBs wouldn’t fit in the G.
    At least my ELBs in my G.
    They’ll need to be customized, and I can see that a struggle. They tend to be expensive too.
    I believe VapExhale went through that too.
    But it’s something that I’ll try to find too.
  • Hazel
    3.7k
    what’s an ELB? Lol Elbow?
  • Cl4ud3
    2.6k
    ELB Easy load bowl, small wire baskets for the VapeXhale cloud Evo that you fill with flower.
    4zd5pw960ru7gqq7.jpg
  • Hazel
    3.7k
    ohhh well that makes way more sense than elbow lol Those are cool. The short ones look close to what we already have and use but deeper. The big ones look like they’ll take this puppy into the maxi-dose sphere lol :death: I like it. :strong:
  • Baron23
    8.2k
    The short ones are the cap.

    I agree that a VXH ELB will not fit....but a shorter one that would fit would be wonderful and allow easy reloading with multiple G43 ELBs with it hot. Keep things cleaner also.
  • SouthboundPachyderm
    1.9k
    I had been thinking about a stand to hold the G upside down for loading all day, and then stumbled on this thread. This would be the must have accessory for me!
  • Cl4ud3
    2.6k
    Something as simple as a block with a hole the diameter of the handle might work. Stick handle in hole and turn the unit, it would still get hot though and turning it could be hazardous.
  • BestBuds
    1.1k
    I love that ELB idea!
  • MothChewMoth
    1.2k
    yep tried mine and it's not just too long, but the baskets are too wide. The outer connections should be the same, but the inner diameter of my G seems to be slightly narrower than that of the EVO. It could just be that mine is a little tight due to the custom nature of the slide, but I'd think Bud would need to find special baskets to fit. I'd absolutely buy some if that were the case.
  • Karec
    473
    yeah i just mentioned the EVO ELB because of @zancru , and to give an example on how the G43 could be a better unit at cleaning and easy load (multiple ELB just waiting to get inside the G43) sounds porn almost :lol: :rofl: :lol: , using something already made would be great especially for us EVO users that have already ELBs but a custom made ELB could be a solution for the existing Gs, i would love a V2 that could get a normal ELB and a smaller one for micro dosing, maybe a bigger chamber with the 18mm? Dont know how much $$$ would add up to custom made the glassware. #vapelifeG43brainstorming
    Cheers
    :cool:
  • Ctipp22
    1.9k
    any way to make it run as long as you need it to without dying would be epic, although would that crack the glass if left on?
  • UbarDog
    1.2k
    oki last alteration.

    Let me know if i missed somthing but i think this is what i will try to build once i find a funnel that will fit.
    New-Bitmap-Image-5.png

    Left Side - Top View of holder laying down on its side.
    Right Side - Side View Showing "Slide arm" locking position.


    Use.
    Hold Slide by the arm. Place slide Oven side 1st into funnel. Over incert into funnel. Then place arm into locking house making sure it drops down. Now upright. There Will be just under a basket's depth of funnel inside the oven and the slide arm holding it in place. Fill the oven with use of funnel, Fill to top of funnel- this allows for basket.
    Lay on its side and remove side. With of help of the Quick rest insert the basket screen.
  • SouthboundPachyderm
    1.9k
    I like the idea. And I may just be missing this entirely. But is there room for the wire in that design?
  • UbarDog
    1.2k

    Ty South , glad someone put a brain cell to work , yes I didn't make it clear :D
    New-Bitmap-Image-5-333.png

    I Find it easier to knock somthing up in paint than to type a paragraph.
  • Zep4
    1.3k
    i5ij5z6yn8ybvdx6.jpeg

    Til I get a VL base.
bold
italic
underline
strike
code
quote
ulist
image
url
mention
reveal
youtube
tweet
Add a Comment