Desktop Vaporizers

  • FlowerPot by NewVape


    Ghost is very good when it’s good. Flowerpot is ALWAYS great!
  • FlowerPot by NewVape

    They most certainly have. I didn’t think they did. I’ve been looking for the last half hour and the majority of I what I would like is sold out in E.U. They do have a 6 ton press but I think I might wait to see if they replenish their stocks as their prices are a lot more reasonable. On another note, my Flowerpot has been dispatched so I’m looking forward to tomorrow. I hope its better than my Ghost!
  • FlowerPot by NewVape

    I thought dabpress had a distribution point in the UK?
  • FlowerPot by NewVape

    I was looking at their website earlier coincidentally but I’m from the UK. There’s a similar company here but charge between £550 and £700 for the 2 I was looking at. I’m not sure though but I’ve never tried rosin before and I really need to scratch this itch!
  • FlowerPot by NewVape

    if you watch dabpress on eBay or send them a note I bought my refurb 10t 3x5 plates for $300 but you still have to buy the handpump which can also be had on eBay for $60-70
  • FlowerPot by NewVape

    Cheers @52. I’ll try to build that muscle memory as quickly as possible, don’t worry about that! I only have wooden flooring so no carpet in my coil like Hapo. I just need to buy a press now and all will be good in the world.
  • FlowerPot by NewVape

    Welcome, your going to love it! Just go slow and build “don’t burn yourself” muscle memory so you can avoid the “burning curve” lol.
  • FlowerPot by NewVape

    Hi all. I just ordered myself a Flowerpot VROD bundle and I’m new to desktop Vaping. I was wondering if it’s possible to use a whip and glass bowl together? It comes with an 18mm female rig, what type of adapter would I need as most say 14mm? Any help or advice would be appreciated.

    I read the 15 pages aswel, so thanks to all who’ve contributed, you are legends! You’ve made me more at ease on whether I’ve chosen the right desktop.
  • FlowerPot by NewVape

    LabPong the vrod head fits comfortably into an Elev8r bowl or any 18/14mm bowl? So not necessary to purchase the NV glass
    bowl? Your preference is the Elev8r bowl over NV glass?
    Chandler

    Ok...now I have the NV glass bowl in hand....the coil and handle can suspend on top of the glass bowl. The showerhead fits over the glass enough to hold the whole coil/handle on it decently. But either bowl you use....will work fine with the showerhead flowerpot.
  • FlowerPot by NewVape

    LabPong the vrod head fits comfortably into an Elev8r bowl or any 18/14mm bowl? So not necessary to purchase the NV glass
    bowl? Your preference is the Elev8r bowl over NV glass?
    Chandler

    To use the Elev8r bowl or any other 18mm adapter type bowl....just turn the flowerpot head upside down and use that side to put over the top of the bowl. With the NV (im pretty sure it is the same as other glass...I will finally have one to test soon thanks to Baron! :up: ) or an aftermarket glass bowl like this..the coil handle is not going to be held onto the bowl so you can let it go..they just fit or sit on the top edge of the glass piece. With the stock metal bowl..the coil head fits and slips down onto the bowl with a good overlap to allow the handle to stay there supported easily...provided your anchored well in what ever glass rig you use.
  • FlowerPot by NewVape

    Damn. It's a little daunting familiarizing oneself with all the new vape jargon. I have a G43, Ed's woodscents and others. My splinter Z is proving to provide excellent effects and flavor not far behind my G43.

    But I'm dying to try one of these! Seems like a desktop to control one's VAS. I was leaning towards showerhead over vrod, the only advantage of vrod is having multiple dish's to dab from, Whereas SH dab area is titanium? I'm not a big dabber, why I was thinking SH. Is there any other advantages of vrod over SH?

    @LabPong the vrod head fits comfortably into an Elev8r bowl or any 18/14mm bowl? So not necessary to purchase the NV glass
    bowl? Your preference is the Elev8r bowl over NV glass?
  • Tsunami by NewVape - what’s the word?

    My main concern with everything being integrated is how easily can it be cleaned. When consuming concentrates I’ve noticed that a clean dish and rig makes a huge difference. I like it when they can be easily cleaned or maintained for maximum flavor and taste.
  • Tsunami by NewVape - what’s the word?

    Its not like any other all in ones.

    It does not try to leverage cheap pen atomizer type heaters and uses a barrel coil, PID in the base, and a SiC or Sapphire 30mm inserts.

    I don't think there is anything much like it.

    But of course, its not out yet and the only people to get to try it were at some MJ festival in the Keys this week. NV said that they would be down there giving it a real work out.

    I too rather liked the look of the square base better. But, these are devices that will often be picked up, I think, and this form seems better suited to grip.

    Cheers
  • Tsunami by NewVape - what’s the word?

    I like the design of the newest version. However, if I were to buy a concentrate rig it would be the Dcup over the Tsunami.
  • Tsunami by NewVape - what’s the word?

    I like it. I would pre order today. The concept after reading their full vision is intriguing
  • Tsunami by NewVape - what’s the word?

    started off cool.... but too concerned with using less material so just keep whittling it down until it’s just boring
  • Tsunami by NewVape - what’s the word?

    Looking like all tha others so probably won't be anything special or different ...
  • Tsunami by NewVape - what’s the word?

    Now that looks like a kitchenAid appliance. Not saying I don’t like it, just saying what popped into my head first time I saw the pic.
  • Tsunami by NewVape - what’s the word?

    I liked the design from a month ago better with the squarish base
  • Tsunami by NewVape - what’s the word?

    It gives me the feel of a 1950's coffee pot and the tin man.....:roll: next design please...... :eyes:
  • The Weed Eater by NewVape

    So I have been using the NV, WE for about a week now and I would like to give a quick overview of what I think,
    I definitely love it, I was pretty sure walking into buying a FP was going to be a good experience but I actually found that I like it more than I thought, I cant get over the simplicity of having the bowl, out in the open for easy access, stiring, dumping, ect, I have to say the first night I went through quit a bit, but after getting use to my technique, and finding my temp settings it really came together, I usually go through a half gram after work, which in this case I don't always finish,

    Which brings me to my next point, the vapor is very potent with the WE, sure you can clear a bowl in one hit, but that hit I noticed really counts,
    I usually load about a scoop and a half wich makes about a .15, I take a nice draw, stir, then finish off the last hit, I noticed that using it this way sets you up for alot of fresh hits.

    If there were certain items that I would recommend going with the flowerpot setup it would definitely be the pax 'scoop', and the 'NV' 'fine grinder', both of these items help me out alot, I grind about a quarter of a gram, dump it in a container, then use the scoop to measure out the amount I need, the grinder really gets you that revealed surface area you want, and as far as the scoop goes, its elegant, well made, and gives me a perfect .1 with every scoop,
    Like I said before, I usually do a scoop and a half for a .15 .17.

    So I would just like to wrap it up by saying the WE is definitely worth the money, I probably from here will end up picking up the V-rod in the future considering I'm all in on the NV products, I'm also looking foward to seeing how this tsunami vape turns out, I'm sure its gonna be sweet :cool: u43x85ty74iodu31.jpg
  • The Weed Eater by NewVape

    ...you say that like it's a good thing...
  • The Weed Eater by NewVape

    thanks for the input, I didn't have to do too much adjusting to get that tight fit, just spread the bottom and middle a bit and got a good fit now on the weedeaeter head, as far as the post all seems good there,
    I'll tell you what, I really think that they possibly should put the adjustment to the coil in the directions or at least make the adjustments themselves before sending out because I dont think my weedeater head was getting effeccient heat the first night because of this,

    Also using a rig your comfortable with the first time is also important, hell I was actually able to lower my temp to 665 and get awesome results,
    I never seen anything like it, I could literly clear an entire .15 in one hit!!? I have never been able to do this with any other device: , I really enjoy the simplicity of the bowl being opened and exposed for a quick view, or a quick stir, I'm definitely loving this thing, already thinking about using it when I get off of work, lol...
    I think it's going to have my full attention for some time now⚓
  • The Weed Eater by NewVape

    As far as making the adjustments non vertically, coil diameter, your going to have to explain that one a lil better because you lost me on that part?38spider

    Hi Spider - so, its a barrel coil and the coils have a diameter which may or may not fit tightly against the post in the middle of your WE. Right?

    So, if one were so inclined, you can take a pair of pliers (with some protection so the teeth don't scratch up your coil) and either slowly tighten or loosen them until the coil fits very well against the metal of the post.

    You may not need to do anything...you coil may be well tight as it is. Or, you may chose to not mess with it, and the fact that it has a shroud around the coil will help keep heat in.

    But, if its a bit loose, then with your pliers and starting from the end of the coil, you can try to very gently bend the coils...one at a time...until you have a tight fit against that center post on the WE.

    Hope this is helpful.

    Cheers and yeah, NV FP vapes hit like a 9 lb hammer. :-)
  • The Weed Eater by NewVape

    So I made the adjustments by loosening the bottom coil, and also the middle coil and the fit is perfect,
    As far as making the adjustments non vertically, coil diameter, your going to have to explain that one a lil better because you lost me on that part?
    Anyway last night was a complete night and day difference using the WE, I ended up using my sneaky pete 14mm globe which I should have used in the first place because that's the piece that I'm use to,
    I think using the 18 mm matrix the first night might have not been a good idea because it's a new rig for me and I should get use to the vape first before using a new water piece,

    Also the other thing that I think made a huge difference was loosening the coils, by doing this I believe it forces better contact with the weedeater head, therefore heat is transformed more accurately, I think it's a hit on newvape for not making this coils fit the head properly,
    It puts pressure on the costumer at risk of damaging or breaking the coils, and after seeing its neccessary after last nights use I believe it needs to be more specific, not as a tip, but as a neccessaty,

    Baron I will tell you on my final note that this thing is absolutely awesome though, now that I got it figured out i wasn't even able to get through my usuall half gram after work, the hits this vape gives off is different then I've ever had, extreme body high, very potent! Great flavor,
    It may be in the running for my favorite,
    I just have to add one last note, i really wish NV would add another person to there support/media team, I fill like they could use a new person to shed light and help costumers/Instagram tech/ ect, :victory: 6bf4lcc5v61c5lb5.jpg
  • The Weed Eater by NewVape

    The screw driver is for vertical fit and as long as it doesn't rattle, has a good vertical fit, and its not real uneven with the distance between coils, then leave it, IMO.

    Adjusting coil diameter is a bit more of a PIA, but I like my coils to be good and snug against the metal I'm trying to heat.

    Cheers
  • The Weed Eater by NewVape

    hey baron, good info, I took a screwdriver and basically loosened the same way I saw in the video, started with the bottom one, then went to the middle, it's a good snug fit, no more rattling, I'm not sure if its tight on the post because im at work away from it right now, but do you think I should go all the way up the remaining coils with the screwdriver?
    Possible this may insure firm contact with the post?
  • The Weed Eater by NewVape

    right, that was one thing that I was focusing on last night, slower draw,
    I think its because this was my first time using the stereo matrix glass piece, I actually never used an 18mm piece until yesterday, I'm going to try downsizing to my 14mm sneaky pete globe tonight and Famarilrize myself that way,
    Im also thinking I probly could have added some more water to the piece I was using last night,
    Probably would have gotten better suction,but all and all I really had a great experience so far, great flavor, and a really different strong body high.
  • The Weed Eater by NewVape

    So spreading the coils vertically will keep it from bouncing up and down. All good doing that.

    But, is it tight on the post inside? If not, you can gently tighten or open the coils...starting from one end...with a pair of pliers with something to cushion the jaws (rag, silicon plier tip, like that).

    You want good spread top to bottom and have it tight against that inner post that will carry heat to the head.

    All this will really do is lower the delta between set point and actual temp...but its worth doing, IMO.

    And yes, if I make to Alaska, I will take you up on the offer of a little bit of site seeing and orientation. :-)

    Cheer

Welcome to Vape Life Forum!

Sign up free for full access to this site.